轴承齿轮模板

ZL(R) series light duty sludge and slurry pump are single-stage, single-suction, cantilever, double casing and horizontal centrifugal slurry pump which apply to operating conditions of large flow, low concentration and lower head. When the speed is low, this pump can transmit slurry of strong abrasion and high density. Compared with WX type slurry pump of equivalent diameter, this type is of small size, light weight and high cost performance and has been widely used in metallurgy, electric power, chemical industry, mining, papermaking, building materials and other industries.

Application

Parameter

For details see clear water performance table.

ZL(R) clear water performance table

Structural features
1. This pump is applicable to high duty and severe operating conditions for having large diameter and short cantilever to ensure the rigidity of the shaft.

2. The hardened stainless sleeve and the shaft are equipped through clearance fit, coupled with O-ring on the two ends, thus the shaft is of wear-resisting and anti-corrosion.

3. Either the front or back cover board of the impeller is equipped with auxiliary blade, which can reduce the return flow and the seal pressure. Other methods like a wider-runner and blade concave are adopted to enhance overcurrent ability and anti-abrasion ability for extending the service life.

4. The ability of withstanding high pressure of the pump casing and cover is ensured by using ductile iron material and strengthening rib.

5. The overcurrent components adopt various high Cr anti-abrasive alloys or different rubber and are of anti-abrasive, anti-corrosion, impact resistance, scouring resistance and other features. Moreover, the metal overcurrent components and the rubber ones can be used interchangeably or in a mixer way to satisfy the requirement of different operating conditions.

6. Seal types like packing seal, auxiliary impeller seal, and mechanical seal are available for shaft seal to satisfy different seal requirement.

7. You can choose to install the output position of the pump by eight different angles (with an interval of 45 degrees).

8. Oil lubrication and grease lubrication are provided to the bearing assemblies. The oil lubrication components is able to lower the operation temperature effectively to reduce the trouble caused by too high bearing temperature. The grease lubrication components have features of simple structure, reliable operation, and easy installing, commissioning and maintenance.

Outline drawing

Outline Dimensions

All dimensions are in millimeters (mm)

A